• G-1, Sector 11, Noida, Uttar Pradesh 201301

Supertech manufacturers metal building systems in India and the product range metal roofing and cladding systems. Supertech profiles are accessible in both ribbed and flat panels in a series of finishes for attractive roofing and cladding for domestic, commercial and industrial applications.

Supertech profiles are accessible in the following materials:

55% Al-zn coated sheet with anti fingerprint coating (e.g. Galvalume, Aluzinc, etc.).
Pre-painted 55% Al-Zn and galvanized sheet, factory painted with polyester, silicon modified polyester (SMP) or fluorocarbon (PVDF) paint systems.
Base Steel

55% Al-Zinc coated steel (Galvalume, Zincalume, Aluzinc, etc.) offering high corrosion resistance. This alloy coating comprises of 55% Aluminium, 443.50% Zinc & 1.5% Silicon which offers a superior barrier protection against coastal atmosphere condition. This coating class is AZ-150 as per AS: 1397 and ASTMA 792 which means 150 gms/sqm minimum coating mass total of both sides. This coating offers almost 3 times service life to that of conventional galvanized coating.

Yield Strength
Supertech Hi-rib profile is created from 550 Mpa grade steel substrates and Supertech Klippon is create from 275-340 Mpa grade steel substrate.
Galvanized Steel
Supertech profiles are also available in galvanized sheet steel (hot dipped zinc coated) over mild steel in a coating mass range of 120-275 gms/ sqm as per IS 277 and in tensile strength of 240 MPa.
Paint Finish

Pre-painted steel is produced on modern, high-speed coil painting lines where the steel surface preparation prior to painting, paint application & paint curing is done on a highly automated line under optimum conditions. Two layers of paint (special corrosion and inhibitive primer & colored top coat) are applied and oven cured in one pass alongwith a backer coat on the reverse side. The paint is flexible to withstand deformation, yet though enough to resist damage during fabrication.

AS: 1397, IS: 513, IS: 277, ASTMA 792

Supertech Hi-rib Roof Sheeting System
Supertech Hi-rib profile is developed to provide scientific solution for roof & side walls of industrial as well as commercial buildings. Supertech Hi-rib is provided with a precisely engineered wide Rib & flute design to ensure wide spanning & quick recovery after being subjected to excessive loads

Crimp Curve
Supertech Hi-Rib profile is also available in concave & convex shapes to enhance building aesthetics.
Supertech Klippon
Supertech Klippon is stiffened trapezoidal profile with wide spanning capability. It is suitable for roofing application on very long roofs down to 2 pitches.  Its bold profile and broad flat outline makes a strong and striking appearance.


This is a field seamed system that combines a slim rib with exceptional uplift resistance. This panel has been designed to withstand the most rigorous conditions for data details and fixing procedures.


This is a snap-together system that was designed for transitions form roof fascia for a continuous, uninterrupted appearance. Each of these system feature optional factory installed hot-melt mastic for low slope applications to ensure weather tight seams. Ribs are provided for added aesthetics value and strength.

Each of the systems feature optional factory installed hot-melt mastic for low slope to ensure weather tight seams.  Ribs are provided for added aesthetics value and strength.  Several water tight designs are accessible, which include single- lock, double lock, and single crimp and capped. Most seams snap together and most mechanically seamed during installation.